FREE MAINLAND UK DELIVERY WHEN YOU SPEND OVER £50

Bostik Flashband Flashing Tape 10m Roll

Bostik Flashband Flashing Tape

Regular price £5.10

Unit price per 

Colour

Roll Size

Bostik Flashband Self Adhesive Flashing Tape for Roofs is a self-adhesive sealing bitumen strip which bonds instantly to provide a permanent watertight seal in all climates. Bostik Flashband Self Adhesive Flashing Tape for Roofs is easily applied using hand pressure and a seam roller, with no requirement for special equipment for cutting, forming or fixing.

USES

Bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, glass, roofing felt, and rigid plastics. Applications include a large variety of original construction and maintenance situations including repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, greenhouse repairs, protecting glazing bars, protecting insulation for pipes and tanks, repairing roofing felt joints on flat roofs.

APPLICATION

PREPARATION

Surfaces must be sound, clean, dry and free from dust, grease, and loose materials. Gaps, deep hollows and depressions greater than 3mm should be filled with an appropriate filler. Porous surfaces should be lightly dampened with water before application. Non-porous surfaces should be dry or only very slightly damp. For improved adhesion on porous, rough, dusty surfaces, apply Bostik Flashband Primer Emulsion or Bostik Flashband Primer SV. Apply Bostik Flashband Primer (or SV), according to the relevant data sheets. Allow to dry, but protect from rain or frost. Do not leave the Bostik Flashband Primer for more than 24 hours and therefore only coat an area sufficient for covering within the working day. Surfaces such as mineralised felt or textured brick may require two coats; apply the second coat when the first coat has dried.

APPLICATION

Cut Bostik Flashband Self Adhesive Flashing Tape for Roofs to required length. Remove approximately 50mm of release backing paper and carefully position the sealing strip. To avoid creasing when applying Bostik Flashband Self Adhesive Flashing Tape for Roofs, hold the release backing paper firmly and remove it steadily from the sealing strip as the product is applied. Smooth gently into position using hand pressure, only. Avoid excessive pressure. Using a seam roller or a piece of rounded wood, smooth the tape to ensure good overall contact and expel any air, especially on overlaps and at edges. When laying adjacent rolls, Bostik Flashband Self Adhesive Flashing Tape for Roofs should be overlapped by a minimum of 25mm for a watertight seal. Bostik Flashband Self Adhesive Flashing Tape for Roofs can be over-painted with conventional decorative paints, though a little staining of the latter may occur at the edges of the strip. Fully bonded Bostik Flashband Self Adhesive Flashing Tape for Roofs will not accommodate appreciable joint movement. For small movements apply a strip of release backing, 50mm narrower than the Bostik Flashband Self Adhesive Flashing Tape for Roofs, along the joint prior to the application of the Bostik Flashband Self Adhesive Flashing Tape for Roofs. For larger movement, polyethylene foam can be laid proud of the joint, so enabling the web of supported Bostik Flashband Self Adhesive Flashing Tape for Roofs to accept the movement. Whilst Bostik Flashband Self Adhesive Flashing Tape for Roofs will not damage plastic sheets it is important to bear in mind the high thermal movement of these materials. If long lengths of plastic are to be sealed use, 500mm lengths overlappe

DATASHEETS

Technical Datasheet

MSDS

Close (esc)

SUMMER CLOSEDOWN 26/08/2022-04/09/2022. REOPENS 05/09/2022

Ideal Sealants will be closed between 26/08/2022-04/09/2022. Any orders placed during this time will be processed 05/09/2022.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now