A unique multi functional cleaner that is designed to digest and remove uncured PU foam from the majority of gun grade PU foam applicators.
Cleans foam guns effectively so they can be stored for re-use.
Remove the clear transit cap and red actuator button. Place the applicator gun upside down, screw the upright canister on to the inverted gun. Do not over-tighten. This will break the integral sealing valve.
Always operate the canister upside down and at arms length, with the gun pointing away from the body. Press the trigger to push the solvent through the gun. Flush for at least 5 seconds and ensure the gun outlet tip is thoroughly cleaned. Place the canister upright, unscrew the canister whilst pressing the trigger. This ensures there is no build up of aerosol when disconnecting the gun applicator from the canister.
With the aerosol canister in the upright position, remove the clear transit cap. Ensure the red activator button is securely in place inside the black sealing valve. Hold the can inverted and push down onto the red actuator button to activate the aerosol. Direct the spray only onto the areas that require cleaning. Replace the clear transit cap.