Idealseal MS290 MS Polymer Sealant and Adhesive 290ml
Tax included
Shipping calculated at checkout
Mainland UK Shipping - Free for orders over £100. Only £5.95 for orders less than £100
In stock
Idealseal MS290 is the ultimate all-round sealant and adhesive offering a durable, flexible, environmentally friendly alternative to traditional sealants, adhesives and putty. It is odourless, non-toxic, low V.O.C., free of isocyanates, solvents and silicones. MS290 has excellent adhesion to dry and wet surfaces without the risk of shrinkage or bubbling and will even cure underwater. Once cured it is paintable and resistant to chemical, fungal and bacterial attack. Tested to EN1186, EN13130, CEN/TS 14234 and approved for use in food preparation areas. Also tested and approved for use on self-cleaning glass.
USES
Idealseal MS290 is suitable for virtually any application where a sealant, adhesive or filler is required. It will seal and bond; wood, glass, ceramics, concrete, metals including lead, fibreglass, EPDM, butyl rubber, vinyl and most plastics.
Common applications include automotive, bathroom and wet room, caravan and mobile home, marine, pond and general construction. MS290 is also suitable for use in correctional institutions and areas where vandalism of sealant may occur due to its excellent anti-pick qualities. Furthermore, it can be used safely in cleanrooms and cold storage.
APPLICATION
Surfaces must be algae, grease, and dust free. Ensure temperature is above 5°C (for underwater applications ensure water temperature is above 5°C). Cut the cartridge seal and screw on nozzle which should be cut to required size. Gun the sealant firmly into joint ensuring no air is trapped behind. If required place masking tape along joint edges, removing within 5 minutes of application.
DATASHEETS
Idealseal MS290 MS Polymer (Colours) TDS
Idealseal MS290 MS Polymer (Clear) TDS
Idealseal MS290 MS Polymer (Black) MSDS
Idealseal MS290 MS Polymer (Grey) MSDS
